Metal Roofing Replacement and Repair Services in Sanibel Island, Florida

Metal Roofs
Metal Roofs

Looking for expert services in metal roofing repair, replacement, inspection, or new installations in Sanibel Island, Florida? Look no further than Sabal Construction & Roofing, LLC. We are certified, insured, locally owned and operated to handle all your metal roofing needs, from converting tile roofing or shingle roofing to metal roofing in preparation for the hurricane season. We proudly utilize high-quality metal and metal profiles provided by Metal Alliance. All custom metal packages are meticulously crafted on-site by Metal Maniacs, ensuring exceptional quality and precision.

Call Sabal Construction and Roofing LLC at 888-591-8559. We have someone available to answer your call 24/7; or contact us online to schedule a no cost roof inspection and estimate

We offer different types of Metal Roofing:

1. Galvalume Steel Coil & Sheet Metal


Pre-Painted and Acrylic-Coated Aluminum-Zinc Coated Steel.  
Galvalume is an aluminum-zinc alloy coated cold-rolled steel ideally suited for metal roofing and metal wall panel applications.

  • Outstanding corrosion resistance
  • High strength-to-weight ratio
  • Good heat resistance & solar reflectivity
  • Excellent cut-edge protection
  • Low maintenance and easy to clean
  • Available in 60+ colors

2. MagnaGuard Steel Coil & Sheet Metal


Pre-Painted Aluminum-Zinc-Magnesium Carbon Steel
MagnaGuard™ is an alloy-coated carbon steel offering advanced protection for today’s metal roofing and metal wall panel systems. Similar to Galvalume® but with the added strength of Magnesium, MagnaGuard features a coated layer of 55% aluminum, 43.4% zinc-magnesium and 1.6% silicone over carbon steel delivering improved resistance to corrosion in extreme environments and enhanced protection against failure from cuts and scratches


  • Improved resistance to corrosion from salt spray
  • Advanced protection at cut edges and scratches
  • High heat resistance
  • Outstanding coating adhesion
  • Excellent formability
  • Available in nearly 40 colors

3. Aluminum Metal Coil & Sheet Metal


Pre-Painted Prime Grade Aluminum

When it comes to metal roofing and metal wall panel systems, Aluminum is a premium choice thanks to its superior corrosion resistance. Known as the lightest metal roofing material available, aluminum is approximately 1/3 the weight of steel, but its strength-to-weight ratio is one of the highest of the common metals (think airplanes). Its light weight combined with resistance to corrosion and high heat make it an ideal material for metal roofing and metal wall panels, especially in coastal environments exposed to regular salt spray. Aluminum is very malleable making it easy to work with when roll forming metal panels and it’s 100% recyclable. Aluminum naturally reflects light and emits heat so its also energy efficient.

4. Copper Metal Coil & Sheet Metal


Architectural Copper, 99% Copper Sheet

Copper coil and flat sheet is skillfully made in the USA with superior flatness and surface quality for peak performance. The inherent protective properties in copper metal roofing and architectural accents mean they will never rust or corrode while remaining virtually maintenance-free. Natural antimicrobial qualities resist fungus and bacteria growth leaving copper surfaces mold- and rot-free. And with its extremely high melting point, having a copper roof is also an excellent hedge against catching fire from a nearby structure since the material is non-combustible.

Sabal Construction and Roofing LLC offers a wide range of services in addition to metal roofing installation. Some of our other services include:

  1. Metal Roof Installation: Our skilled professionals specialize in installing various metal roofing systems, such as standing seam, corrugated, and stone-coated steel. We will work closely with you to identify the perfect metal roofing solution tailored to your unique needs and preferences.Metal Roofing in Cape Coral
  2. Metal Roof Repair: We can repair any type of roofing issue, from leaks and missing shingles to storm damage and moreMetal Roofing Close-Up
  3. Roof Replacement: If your roof is beyond repair, we can provide a full roof replacement to ensure your home or business is protected from the elements.
    Metal Roofing in Fort Myers
  4. Metal Roof Maintenance: Regular maintenance is key to ensuring the longevity of your roof. We offer routine inspections and maintenance services to keep your roof in top condition.
  5. Gutter installation: Properly functioning gutters are crucial for directing water away from your home’s foundation. We can install high-quality gutters that will protect your property from water damage.
    Roofing Company in Florida
  6. Soffit and fascia repair and installation: Soffit and fascia play an important role in the overall function and appearance of your roof. We can repair or install these components to keep your roof looking and performing its best.
    Roofing Company in Florida
  7. Roofing Financing: Looking to finance your roofing project? We got you covered, we partner with financing company that make it easy and convenient to bring your dream roofing project to life.

Experience a Seamless and Professional Metal Roofing Installation Process with Sabal Construction and Roofing, LLC

At Sabal Construction and Roofing, LLC, we are dedicated to providing a seamless and meticulous metal roofing installation process, ensuring the highest level of quality and durability for your new roof. When you schedule a free roof inspection, our team of experts will perform an on-site evaluation of your property, assessing the current condition of your roof, identifying potential issues, and determining the most suitable metal roofing system to meet your needs. Furthermore, we will discuss your preferences, budget, and any specific requirements you may have.

After receiving your approval and signature on the estimate, we will present you with a Notice of Commencement (NOC) to sign. You will also be provided with a color selection sheet, allowing you to choose the ideal brand and color that aligns with your preferences. Once all paperwork and materials have been gathered, we will schedule your project and initiate the following procedures:

Day 1: Material for the dry-in will be delivered to the house and loaded onto the roof.

Day 2: We will begin the tear-off.

  • Our crew will show up with a 6-10 workers depending on the size of the roof. We try to tear-off the entire roof in one day. Sometimes due to extra plywood and fascia needing to be replaced we may have to send a few workers out for a second day.

  • To protect your driveway, AC units, exterior pumps, equipment, and landscaping, we will use plywood and tarps.

  • We utilize dump trailers for debris disposal to minimize driveway damage and avoid overnight obstruction.

  • Before leaving for the day, our team will thoroughly clean the job site.

Day 3 or 4: The local municipality will inspect the dry-in process.

Day 3 or 4: Our supplier will run the metal package on site and stage on the driveway.

Day 5-7: Our crew will install the metal roofing and perform a final job site clean-up.

Day 7-10: Any required soffit, fascia, and gutters will be completed after the metal installation.

Day 7-10: The local authority will conduct the final inspection.

Dry-in Process

Applying Polyglass TU MAX on Metal Roof
Applying Polyglass TU MAX on Metal Roof

The dry-in process is a critical step in the installation of a metal roof. It involves installing the underlayment and metal panels in a way that ensures the roof is watertight before any finishing touches are added. This is important because it protects the underlying structure of the roof from water damage and ensures that the roof will be able to withstand extreme weather conditions.

  • For the dry-in stage, we use Polyglass TU MAX self-adhering underlayment, a high-quality waterproofing solution designed for adhesive foam applications. Polystick TU MAX features ADESO® dual-compound self-adhered technology, consisting of a polymer-modified bitumen upper compound and a proprietary self-adhesive SBS (elastomeric) compound on the bottom. A split release film protects the self-adhesive compound, ensuring easy application.

  • We employ color-matched galvanized steel drip edge, valley metal, and flashing to seamlessly blend with the final metal panels.

  • Our team uses metal head simplex nails for securing the head laps of the underlayment during the dry-in process, providing superior performance compared to the plastic head simplex nails used by other contractors.

  • To attach the drip edge, valley metal, and flashing, we use galvanized 1 ¼” coil nails, ensuring all metal is nailed 6” on center as per code requirements.

  • During the eave's drip edge installation, we first apply a 6” self-adhering base sheet along the entire eave. The drip edge is then placed on top of the base sheet, followed by the TU MAX underlayment, which overlaps the drip edge.

  • This method surpasses code requirements and provides enhanced long-term protection for fascia and soffit materials by preventing minor leaks through the drip-edge fasteners.

Sabal Construction & Roofing Metal Roofing
Roofing Materials

Sanibel Island, FL's Leading Metal Roofing Contractor

Sabal Construction & Roofing LLC, an experienced general contracting and metal roofing company, is family-owned and locally operated by a second-generation Floridian contractor. We are a State Certified General Contractor and fully insured company. We responsibly adhere to all job specifications, manufacturer requirements, and safety codes to provide premier service to our valued customers.

Contact Sabal Construction and Roofing LLC at  888-591-8559 for a free consultation and discover how we can help you enhance the beauty, durability, and energy efficiency of your home or business with our innovative metal roofing solutions in Sanibel Island, Florida.

GC License - Expiring on August 31, 2024
Roofing License - Expiring on August 31, 2024


Jackie RodriguezGoogle Review
Read More
They installed my gorgeous standing seam metal roof before Ian and it did not even flinch one bit! They are extremely professional, loyal, and hard working. With such a BIG expense I wanted to make sure to choose the BEST of the BEST and they truly are hands down! I feel even more comfortable living under my roof thanks to them!!!!!
TeresaGoogle Review
Read More
My husband and I were thrilled to work with Robert Fuls and the Sabel crew. Our shingle roof had sustained damage from Ian and needed to be replaced. Robert responded to my request for a quote during off hours and came the next day to give us a quote. His knowledge of the process and the current status of the industry and inventory levels was extremely helpful in our roof selection.
Jennifer MartinGoogle Review
Read More
We used Sabal to replace a damaged roof on our home in Cape Coral. We got a couple quotes and Sabal was competitive. Jorge was very professional and communicative. He sent updates and photos as the work progressed. I would certainly use them again. Thank you, Sabal.
Julie YanceyGoogle Review
Read More
My husband contacted Jorge Maldonado from Sabal Construction soon after Hurricane Ian. Jorge was very prompt in giving us a competitive quote for our roof replacement. After getting several other quotes from various roofing companies, we decided to go with Sabal. Jorge gave detailed information on the replacement process and timeline
Caitlin DiNardoGoogle Review
Read More
From the very beginning of the process, Sabal Construction was extremely professional. From the admin to the installation team, everyone was knowledgeable, responsive and left us satisfied customers. We highly recommend using this company! Coach Ed

Schedule A Free Roof Inspection Today!

"*" indicates required fields

Type of Roofing*
How old is your roof?*
This field is for validation purposes and should be left unchanged.